Delta-T Cooking - Henny Penny SMART COMBI FM05-061-A Operating Manual

Construction and function

3.5.5 Delta-T cooking

22
Size
∅ 26 cm (10.2")
615
620
115
120
215
220
On slide-in racks (1/1 unit with special
FlexiRack racks)
Table 1: Plate capacities
Size Regeneration temperature
615 120 °C (248 °F)–130 °C (266 °F)
620 120 °C (248 °F)–130 °C (266 °F)
115 120 °C (248 °F)–130 °C (266 °F)
120 120 °C (248 °F)–130 °C (266 °F)
215 120 °C (248 °F)–130 °C (266 °F)
220 120 °C (248 °F)–130 °C (266 °F)
Table 2: Regeneration temperatures and times
With Delta-T cooking, the cooking temperature depends on the core
temperature of the food being cooked. Cooking times with Delta-T cooking
are longer than with other cooking modes. You can make good use of
slack periods by using the additional "preset start time" function.
With Delta-T cooking, the cooking temperature is always higher than the
actual core temperature of the food being cooked. This difference is a
previously set value (Delta-T value).
The formula is:
current core temperature + Delta-T value = cooking temperature
Since the core temperature of the food being cooked is needed, you must
use the core temperature sensor with Delta-T cooking.
Operating manual
SmartCombi
∅ 28 cm (11")
30 24
30 24
50 40
50 40
100 80
120 120
™
∅ 32 cm (12.6")
22
22
40
40
80
80
(plate rack frame or
rack trolley)
Regeneration time
4–8 minutes
4–8 minutes
4–8 minutes
4–8 minutes
6–10 minutes
6–10 minutes
Global Foodservice Solutions