Removing The Power-Connector Port; Installing The Power-Connector Port - Dell Precision Mobile Workstation M4700 Owner's Manual

p) base cover
q) battery
r) ExpressCard
s) SD card
7. Follow the procedures in

Removing the Power-Connector Port

1. Follow the procedures in
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) keyboard trim
f) keyboard
g) optical drive
h) hard drive
i) primary memory
j) secondary memory
k) processor fan
l) video-card fan
m) palm rest
n) processor heatsink
o) processor
p) video-card heatsink
q) video card
r) I/O board
s) display assembly
t) system board
3. Un-route and lift up the power-connector cable from the chassis to remove the power-connector port.

Installing the Power-Connector Port

1. Insert the power-connector port in its slot and route the power-connector cable to the chassis.
2. Install the:
After Working Inside Your Computer .
Before Working Inside Your Computer .
51