2.
Press on the positions indicated until it snaps in place.
3.
Connect the following cables to the system board:
a) power button
b) touchpad
c) speaker
d) media board
e) fingerprint
f) RFID
4.
Tighten the screws to secure the palmrest to the front of the computer.
5.
Tighten the screws to secure the palmrest to the base of the computer.
6.
Install the:
a) hard drive
b) optical drive
c) keyboard
d) keyboard trim
e) base cover
f) battery
7.
Follow the procedures in
Removing the ExpressCard Module
1.
Follow the procedures in
2.
Remove the:
a) ExpressCard
b) battery
After Working Inside Your Computer .
Before Working Inside Your Computer .
33