Installing The Base Cover; Removing The Keyboard Trim - Dell Precision Mobile Workstation M4700 Owner's Manual

Installing the Base Cover

1. Slide in and place the base cover to align with the screw holes correctly on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Install the battery.
4. Follow the procedures in

Removing the Keyboard Trim

1. Follow the procedures in
2. Remove the battery.
3. Pry up the keyboard trim starting from the top-inner edge.
4. Pry up the bottom edge of the keyboard trim from the top-inner edge.
After Working Inside Your Computer .
Before Working Inside Your Computer .
15