Table of Contents
Advertisement
c
hard drive assembly
d
keyboard
e
palmrest
3
To remove the display cable:
a
Remove the screw to release the metal tab that secures the display cable [1].
b Lift the metal tab to access the display cable [2].
c
Peel the adhesive tape that secures the display cable [3].
d Disconnect the display cable from the connector on the system board [4].
Installing the display cable
1
Connect the display cable to the connector on the system board.
2
Affix the adhesive tape to secure the display cable.
3
Place the metal tab on the display cable.
4
Tighten the screw to secure the metal tab.
5
Install the:
a
palmrest
b
keyboard
c
hard drive assembly
d
base cover
e
battery
6
Follow the procedure in
Removing the power connector port
1
Follow the procedure in
2
Remove the:
a
battery
b
base cover
c
hard drive assembly
d
keyboard
e
palmrest
f
display cable
3
To remove the power connector port:
a
Disconnect the power connector port cable from the connector on the system board [1].
b Release the power connector port cable from the placeholders.
c
Remove the screw that secures that power connector port to the computer [2].
d Lift and remove the power connector port from the computer [3].
After Working Inside Your
computer.
Before Working Inside Your
Computer.
Removing and installing components
19
Advertisement
Table of Contents
