Installing The Coin Cell Battery; Removing The Power Connector Port - Dell P26S Owner's Manual

Installing the coin cell battery

1. Place the coin cell battery into the slot on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
3. Install the:
a. battery
b. base cover
4. Follow the procedure in

Removing the power connector port

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the power connector port:
a. Unroute the eDP cable [1].
b. Disconnect the power connector port cable from the computer [2].
c. Remove the screws to release the metal bracket on the power connector port [3] .
d. Lift the metal bracket from the computer [4].
e. Remove the power connector port from the computer [5].
20
After working inside your
Before working inside your
computer.
computer.