Installing The Hard Drive; Removing The Wireless Local Area Network (Wlan) Card - Dell Precision Mobile Workstation M4700 Owner's Manual

4. Flex the hard-drive bracket outward and pull out the hard drive from the bracket.
NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent
vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when
installed into the hard-drive bracket.

Installing the Hard Drive

1. Engage the hard -drive bracket to the hard drive.
2. Insert the hard drive into its slot in the computer till it clicks in place.
3. Tighten the screws to secure the hard drive to the computer.
4. Install the:
a) base cover
b) battery
5. Follow the procedures in

Removing the Wireless Local Area Network (WLAN) Card

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
3. Disconnect and un-route the antenna cables connected to the WLAN card. Remove the screw that secures the
WLAN card to the computer. Remove the WLAN card from the computer.
24
After Working Inside Your Computer.
Before Working Inside Your Computer .