Installing The Ush Board; Removing The Display Assembly - Dell Precision Mobile Workstation M4700 Owner's Manual

Installing the USH Board

1. Align the USH board to its original position on the computer.
2. Tighten the screws to secure the USH board to the computer.
3. Connect the smart-card and the USH board cables to the system board.
4. Install the:
a) palmrest
b) hard drive
c) optical drive
d) keyboard
e) keyboard trim
f) base cover
g) battery
5. Follow the procedures in

Removing the Display Assembly

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
c) keyboard trim
d) keyboard
e) optical drive
f) hard drive
g) palmrest
3. Disconnect the antenna cables from the wireless cards, and push them down the routing hole.
After Working Inside Your Computer .
Before Working Inside Your Computer .
43