Specifi Cations - Follett HCE Operation And Service Manual

Specifi cations

Electrical
Each ice machine requires its own separate circuit with electrical disconnect within 10 ft (6m).
Equipment ground required.
Standard electrical:
HCE/HME700: 230/50/1 (6 ft (2m) cord
Maximum ice machine fuse – 15A each
Amperage: 7A
Plumbing
3/8" OD push-in water inlet
3/4" MPT drain
1/4" FPT condenser inlet (water-cooled condenser only)
1/4" FPT condenser drain (water-cooled condenser only)
Notes: 3/4" vented drain line must slope a minimum of 1/4" per foot (6mm per 30.4cm run).
Drain to be hard piped and insulated.
To prevent back fl ow, do not connect drains.
Separate drains for ice machine and condenser.
Water shut-off recommended within 10 feet (3m).
Water supply must be treated by a scale-inhibiting fi lter (Follett item# 00130286).
Ambient
Air temperature
Water temperature
Water pressure – potable
Note: Water-cooled condenser pressure 150 psi (1034 kPa)
Heat rejection
Air-cooled rejects 8850 BTU/hr
Water-cooled rejects 10150 BTU/hr
Ice production
Note: Water regulating valve set to maintain a 215 PSIG (95°F Saturated R404A) discharge pressure at all
conditions.
Air-cooled ice machine capacity/24 hrs.
Ambient Air Temperature F/C
F 60 70 80 90 100
C 16 21 27 32 38
50 651 600 571 518 460
295 272 259 235 209
10
620 574 531 492 443
60
281 260 280 223 201
16
70 572 538 506 479 416
21 259 244 230 217 189
80 569 519 493 452 415
27 258 235 224 205 188
537 504 471 430 389
90
244 229 214 195 176
32
100 F/38 C max.
90 F/32 C max.
70 psi max. (483 kPa)
Water-cooled ice machine capacity/24 hrs.
Ambient Air Temperature F/C
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
50 F/10 C min.
45 F/7 C min.
10 psi min. (89 kPa)
F 60 70 80 90
16 21 27 32
C
608 600 592 583 lbs
50
276 272 269 264 kg
10
578 571 567 548 lbs
60
16 262 259 257 249 kg
70 554 540 537 528 lbs
21 251 245 244 239 kg
80 530 521 514 489 lbs
240 236 233 222 kg
27
515 512 508 484 lbs
90
234 232 230 220 kg
32
5