Table of Contents
Advertisement
Quick Links
HCC1000AJS, HCC1400AJS, HCC1000WJS, HCC1400WJS,
HCE1000AJS, HCE1400AJS, HCE1000WJS, HCE1400WJS
(See model number confi gurator on page 2 for details.)
Order parts online
www.follettice.com
™
Horizon
icemaker Installation Instructions
for Drop-In Satellite-fi ll
801 Church Lane • Easton, PA 18040, USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
™
applications
self-contained
208264
Stock Module Identification Plate
Module No.
Product
Service No.
00159939R03
Advertisement
Table of Contents
Related Manuals for Follett Horizon HCC1000AJS
Summary of Contents for Follett Horizon HCC1000AJS
- Page 1 HCC1000AJS, HCC1400AJS, HCC1000WJS, HCC1400WJS, HCE1000AJS, HCE1400AJS, HCE1000WJS, HCE1400WJS (See model number confi gurator on page 2 for details.) Order parts online www.follettice.com 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.com ™...
- Page 2 E 230/50/1 (self-contained only) † Ice Manager Diverter Valve Systems can be used to fill any two of these bins or dispensers with a single ice machine. Chewblet is a registered trademark of Follett Corporation, registered in the US. 1400 Series...
-
Page 3: Front Cover
Follett receives the equipment at the factory in Easton, PA within 30 days after issuance of the return authorization number. The equipment must be returned in Follett packaging. If the packaging has been damaged or discarded, Follett will forward, at the customer’s expense, new packaging. - Page 4 Carefully unpack and inspect the contents of your Follett icemaker. Unpack icemaker ➊ ➌ 1/2" ➎ ➋ ➍ 1/2" ➏ DROP-IN • SATELLITE-FILL self-contained Unpack...
-
Page 5: Site Preparation
• 10-70 psi (69-483kpa) • 45 to 90 F (7 to 32 C) • Follett recommends the use of an in-line water filtration system (item# 00130286) Condenser water supply for water-cooled systems • 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.) •... -
Page 6: Dispenser Preparation
Prepare the dispenser. Dispenser preparation ➌ ➋ ➍ 4" (101,6mm) • Determine best route for ice transport tube run. Note: 12" (304,8mm) clearance is required. • Drill 1 3/4" (44,5mm) hole through either side of dispenser ➋ • Install gasket onto bulkhead fitting •... - Page 7 DROP-IN • SATELLITE-FILL self-contained...
- Page 8 Install the louvered docking assembly. • Docking station must be secured in accordance with these instructions to ensure icemaker stability. • Ventilation openings in the louvered docking station should be clear of obstruction Wall bracket accessory • Mount louvered docking assembly to wall bracket accessory Undercounter installation requirements Horizon 1000 &...
- Page 9 Undercounter installation detail – Horizon 1000 & 1400 series Front View ➌ 1.875" (48mm) 1.75" (45mm) ➍ • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifi cations on facing page (4.1) 1000 series - 28.6"...
-
Page 10: Ice Transport Tube
Install the ice transport tube. Ice transport tube installation. Ice transport tube tips • Insulate entire length of ice transport tube • Secure ice transport tube For long tube runs see guide on page 16. • Pitch tube at least 1/4" per foot (6,4mm/.3m) •... -
Page 11: External Connections
Connect utilities to louvered docking assembly. Air-cooled icemakers only ➋ ➊ • Remove access panel if necessary ➊ • Install drain line The rigid drain line from the icemaker must have at least 1/4" per foot pitch (6,4mm/0,3m). • Install icemaker potable water supply •... -
Page 12: Internal Connections
Connect louvered docking assembly to icemaker. CAUTION • Plug must be accessible after fi nal installation. • HCE1400A/W 230/50/1) requires a 20 amp circuit (4.00 mm Air-cooled icemakers – follow steps 7.1 through 7.4. Ice transport tube ➋ ➊ • Slide icemaker into louvered docking ➊... - Page 13 Water-cooled icemakers – follow steps 7.5 through 7.10. Cooling lines • Install icemaker cooling water lines to louvered docking assembly Potable water and drain lines • Insert potable water line into valve • Push drain line over hose barb on ➋...
- Page 14 7.10 Power cord Power cord • Remove twist tie • Position plate into opening and secure with supplied screw • Carefully pass plug thru opening and plug into wall outlet DROP-IN • SATELLITE-FILL self-contained...
-
Page 15: Front Cover
Install front cover to icemaker. Front cover installation – undercounter ➊ ➋ ➌ CAUTION • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifi cations in section •... - Page 16 Long tube run recommendations • Pitch ice transport tube to allow melt water to drain towards icemaker • Secure insulated ice transport tube at least every 3 ft (.9m) to prevent dips or traps 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 •...