Installation (2) - Husqvarna AUTOMOWER 305 Operator's Manual

6.4 Installation (2)

The following operating settings are available via this
selection in the main menu.
• Guide width (2-1)
to select the distance from the guide wire the
mower is allowed to travel when it follows this to
and from the charging station.
• Remote start (2-2)
to control the mower so that it can easier reach
remote parts of the garden.
• Test settings (2-3)
to check the above settings.
• Drive past wire (2-4)
to set the distance over the boundary wire that the
mower should drive.
For examples of garden settings, see 7. Garden
example
Guide width (2-1)
The guide width is a measure of how far from the
guide wire the mower is allowed to travel when it
follows the guide wire to and from the charging
station. The area beside the wire which the mower
then uses is called the Corridor.
Automower ® has a default setting for medium wide
corridors. To further reduce the risk of tracks forming,
it is recommended to select a wide corridor in working
areas where it is possible to do so.
IMPORTANT INFORMATION
Always use as wide a guide width as
possible. The Narrow setting must only be
used when none of the other settings can be
used in the working area in question.
Wide (2-1-1)
In a wide corridor, Automower
distances to the guide wire.
A garden that is open and free of narrow passages
should have a wide corridor to minimise the risk of
tracks forming.
Medium (2-1-2)
In a medium wide corridor, Automower
to and far away from the guide wire, but not as far
away from the guide wire as is the case when a wide
corridor is selected.
The medium corridor setting should be selected for a
garden with obstacles close to the guide wire and/or
passages that do not allow for a wide corridor.
44 - English
6. MENU FUNCTIONS
mows at various
®
® travels close
Timer
Installation
Security
Settings
Guide width
Remote start
Test settings
Guide width
Remote start
Test settings
Drive past wire
Narrow
Medium
Wide