System Overview; Installation - Husqvarna 970 71 36-01 Quick Manual

QUICK GUIDE
A

System overview

The EPOS system contains a robotic lawn mower, a
charging station and a reference station. The robotic
lawn mower and the reference station receive satellite
signals for positioning. The reference station is
stationary and sends correction data to the robotic lawn
mower to get an accurate position for the robotic lawn
mower. The work area is made virtually in an app by
operating the product and adding waypoints to make a
map in an app.
1. Navigation satellites
2. Satellite signals
3. Reference station
4. Correction data
5. Charging station
6. Virtual boundary
7. Stay-out zone
8. Work area
9. Mobile device
10. Docking point
11. Transport Path
For a complete map installation a work area and a
charging station are necessary. A work area is an area
where the product can operate and cut grass
automatically. A work area is specified by virtual
boundaries. The charging station can be put in the work
area or near the work area that is connected to it with a
transport path. A transport path is a specified path
between the docking point and a work area. The product
can operate automatically in this path, but does not cut
grass. Stay-out zones can be made if there are areas
where the product is not allowed to operate. A stay-out
zone is specified by virtual boundaries. A maintenance
point is a specified position where the product can be
parked at.
B
Connectivity
a. Automower® Connect app is used for settings and daily
operation of the product.
QG_P2ZR_450X, 450XH EPOS_1143192-38.indd 3 QG_P2ZR_450X, 450XH EPOS_1143192-38.indd 3
C

Installation

The reference station and the robotic lawn mower need
unimpeded sky view to be able to operate reliable
without stops.
1. Install the Automower® Connect app and Husqvarna
Fleet Services™ app to your mobile device. Download the
apps from App Store or Google play.
2. Pair the robotic lawn mower with the app.
3. Install the charging station.
4. Install the reference station. Refer to Operator's manual
for the reference station.
5. Pair the robotic lawn mower with the reference station in
the app.
6. Pair the robotic lawn mower to the charging station and it
will specify the docking point in front of the charging
station.
7. Specify the work area by operating the product clockwise
with appDrive around the work area and adding
waypoints on the map in the app.
8. Specify the stay-out zones by operating the product
counterclockwise with appDrive around the stay out zone
and adding waypoints on the map in the app.
9. Specify the transport path by starting in the work area.
Operate the product with appDrive to the charging station
and add waypoints on the map in the app. The transport
path is connected to the docking point when you save the
transport path.
10. Specify the maintenance point and make a path to the
charging station. Start at the maintenance point and
operate the product with appDrive to add waypoints on
the map in the app. The path to the charging station is
connected to the docking point when you save the
maintenance point.
11. Use the app to adjust the schedule and the settings for
the robotic lawn mower.
For more information, read the Operator's manual
for the reference station and the Operator's
manual for the robotic lawn mower.
EN en
2022-10-14 15:04:58 2022-10-14 15:04:58