Transport And Removal; In The Case Of Thunderstorms - Husqvarna AUTOMOWER 305 Operator's Manual

4. Clean the blade disc and underframe using,
e.g. a dish-brush.
At the same time, check that the blade disc
rotates freely in relation to the foot protection
cover.
If long blades of grass or other objects find their
way in, these may impede the blade disc. Even a
slight braking effect leads to a higher
consumption of energy and longer mowing
times, and at the worst will prevent the mower
from being able to mow a large lawn. The blade
disk must be removed to carry out a more
thorough cleaning. If necessary, contact your
dealer.
Chassis
Clean the underside of the chassis. Brush or wipe
with a damp cloth.
Wheels
Clean around the front wheels and rear wheel as well
as the rear wheel support unit.
Body
Use a damp, soft sponge or cloth to clean the body.
If the body is very dirty it may be necessary to use
a soap solution or washing-up liquid.
Charging station
Clean the charging station regularly of grass, leaves,
twigs and other objects which may impede docking.

8.5 Transport and removal

Secure the machine during transport. It is important
that Automower ® does not move when it is being
transported, for instance, between lawns.

8.6 In the case of thunderstorms

To reduce the risk of damage to components in the
Automower , we recommend that all connections to
®
the charging station be disconnected (power supply,
boundary wire and guide wire) if there is a risk of a
thunderstorm.
8. MAINTENANCE
English - 55