Husqvarna AUTOMOWER 305 Operator's Manual page 19

The transformer shall be mounted on a vertical
surface, for example a house wall. Mount the
transformer with screws in the two attachment points.
Securing screws are not included. Choose screws
suitable for the wall material.
Mount the transformer at a height such that there is
no risk the transformer can become submerged in
water (minimum 12"/30 cm from the ground). The
transformer must never be placed on the ground.
IMPORTANT INFORMATION
The low voltage cable must not be shortened
nor extended.
IMPORTANT INFORMATION
Place the low voltage cable so that the blades
on the blade disc can never come in contact
with it.
Installation and connecting the charging
station
1. Position the charging station in a suitable spot.
2. Connect the low voltage cable to the charging
station.
3. Connect the transformer's power cable to a
230 V wall socket. If the wall socket is outdoors,
it is important that the transformer is protected
from direct sunlight.
4. Attach the charging station to the ground using
the supplied screws. Ensure the screws are
screwed all the way down in the countersink.
IMPORTANT INFORMATION
It is not permitted to make new holes in the
plate. Only the existing holes may be used to
secure the plate to the ground.
3. INSTALLATION
min 30cm/12"
English - 19