Standards - Allied Telesis AT-8948 Installation And Safety Manual

x900 Series Switch and SwitchBlade

Standards

Where applicable, the products in this document meet the following standards:
Category
Safety
Electromagnetic
NEBS
ETSI
WEEE
RoHS
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void
your right to operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
32
®
x908
Approval Agency and Requirement
UL60950-1
CAN/CSA-C22.2 No. 60950-1-03
EN60950-1
AS/NZS 60950.1
FCC CFR47 Part 15 Class A
EN55022 Class A
VCCI Class A
AS/NZS CISPR22 Class A
GR-63-Core NEBS Level 3
GR-1089-Core NEBS Level 3
ETSI 300 019
ETSI 300 132
Meets requirements of Directive 2002/96/EC of the European Parliament
and of the council of 27 January 2003
Meets requirement of Directive 2002/95/EC of the European Parliament
and of the council of 27 January 2003
U.S. Federal Communications Commission
Canadian Department of Communications
EN 60825-1
EN 60825-2
21 CFR 1040
CNS 13438 Class A
EN61000-3-2/3
EN55024
ETSI 300 386