Power Supply Attachments - Albatron K8NF4 Series User Manual

Power Supply Attachments

ATX Power Connector: ATX_PWR、ATX_12V
This mainboard requires two ATX power connections. The first is a 24-pin connector and the second
is a 4-pin connector. Attach the 4-pin connector first and then attach the 24-pin connector. Make sure
the connectors are secure before applying power. (ATX_PWR can be attached to a 20-pin connector
but be extra careful with the connector orientation when connecting the cables)
Attention: Please make sure that the 4-pin power cable
has plugged in the ATX_12V connector in case that the
over load power requirement may damage the mainboard.
20
K8NF4 Series
ATX_PWR