Communication Setting - IDVIEW IV-110TX-SN Installation & Operation Manual

NOTE: Clock data is retained for about 3 months
after the 15-hour power supply is used up (in the
operate On mode).
DAYLIGHT SAVING:
This entry allows users to set the daylight
saving time.
OFF: Disables the daylight saving time.
USA: Daylight saving time begins at 2:00 a.m.
on the first Sunday of April. Time reverts to
standard time at 2:00 a.m. on the last Sunday
of October.
EUROPE ( Except UK ): Daylight saving time
begins at 2:00 a.m. on the last Sunday of
March. Time reverts to standard time at 2:00
a.m. on the last Sunday of October.
UK: Daylight saving time begins at 1:00 a.m.
on the last Sunday of March. Time reverts to
standard time at 1:00 a.m. on the last Sunday
of October.
SET: to set the start and ending for the
daylight saving time.
REC ENABLE:
This option enables/disables the programmed
scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time
each day when the DVR will start and stop
recording. There are
day available for scheduling. The time is
displayed in a 24-hour clock format. If there
is a time overlapping showing between two
continual time period settings, the device
will automatically
time-period settings into one.
2
time periods each
combine the two
33
REC SCHEDULE
START END
START END
S
00:00- 00:00 00:00- 00:00
M
00:00- 00:00 00:00- 00:00
T
00:00- 00:00 00:00- 00:00
W
00:00- 00:00 00:00- 00:00
T
00:00- 00:00 00:00- 00:00
F
00:00- 00:00 00:00- 00:00
S
00:00- 00:00 00:00- 00:00
CANCEL
OK
TO MOVE

4.4 COMMUNICATION Setting

MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
This option allows you to configure the
statuses of the
communication ports when connected to
external devices,
communications settings. Please refer to 6.1
RS-232/RS485 Protocols and 5. Network
Functions for more details.
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
RS232
RS485
NET ENABLE
NET DHCP
NET IP
NET ACCOUNT
FTP SETTING
MAIN PAGE
COMM ID:
Communication ID for the RS232 and RS485
communication ports. After the DVR receives a
TO CHANGE
RS-232 / RS485
and the Ethernet
: 01
: ON
: ON
: ON
: ON
: SET