Alarm / Motion Recording; Externally Triggered Recording - IDVIEW IV-110TX-SN Installation & Operation Manual

during the scheduled recording to stop it any
time. If you wish to continue the scheduled
recording, press the REC button
proceed.
Note : You can proceed to start the scheduled
recording from the current time if it is in the
scheduled interlude as soon as setting is
completed, and come out from the menu to
start recording.
Note : If you activate the recording function
before the scheduled recording, the unit will
operate recording as shown in the diagram
below and keep those Images in different files.
START END
03:00 06:00 08:00
Start Manual Timer
Recording

3.2.3 Alarm / Motion Recording

Take the following steps to activate the
programmed alarm recording. For the ALM
OPERATION, REC RATE, REC QUALITY,
AUDIO, ALM TYPE, ALM DURATION, and
PRE-ALARM settings, please refer to section
4.2 for more details.
(1) Press the Setup button
MAIN MENU.
(2) Select ALARM / MOTION and press the
Enter button 15
MOTION.
(3) Set the desired
QUALITY, ALM
DURATION for use. If audio is required,
set AUDIO to ON. If pre-alarm recording is
required, set PRE-ALARM to ON.
(4) To activate/deactivate the alarm recording,
set ALM OPERATION to ON/ OFF.
6 to
START END
12:00 14:00
Manual Timer Manual
9
to enter the
to enter the ALARM /
REC RATE, REC
TYPE, and ALM
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM/ MOTION
ALM OPERATION
REC RATE
REC QUALITY
AUDIO
ALM TYPE
ALM DURATION
PRE-ALARM
MOTION SETTING
MAIN PAGE
(5) To active the motion alarm recording, select
MOTION SETTING and press the Enter
button 15 to enter the MOTION SETTING
PAGE, set MOTION ENABLE TO ON, and
set a suitable SENSITIVITY and REGION
according to the video sources.
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
MOTION SETTING
MOTION
SENSITIVITY
REGION
MAIN PAGE

3.2.4 Externally Triggered Recording

By connecting/ disconnecting RECORD IN of
ALARM I/O on the rear panel of the DVR, you
can activate/deactivate the recording function of
a DVR. The file will be kept with a prefixed "R".
17
: ON
: 30 F/S
: BEST
: OFF
: NO
: 0 SEC
: OFF
ALARM/ MOTION
ALM OPERATION : OFF
REC RATE : 30 F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE-ALARM : OFF
MOTION SETTING
MAIN PAGE
: ON
: 3
: SET