IDVIEW IV-110TX-SN Installation & Operation Manual page 36

RS232 or RS485 command, it checks if the
<Dest ID> within the code is the same as the
COMM ID, in which case the particular
command can be accepted.
RS-232:
The RS-232 communication port can be
either in an importing or exporting mode
according to your applications.
ON: Enables the RS-232 communication
port. When you wish the unit to be
controlled by an external device,
please select this entry for use.
OFF: Disables the RS-232 communication
port.
RS-485:
The RS-485 communication port can be
either in an importing or exporting mode
according to your applications.
ON: Enables the RS-485 communication port.
When you wish the unit to be controlled
by an external device, please select this
entry for use.
OFF: Disables the RS-485 communication
port.
NET ENABLE:
This option enables or disables the Ethernet
communication port.
OFF: Disables it.
ON: Enables it.
NET DHCP:
This option enables or disables the Ethernet
communication port.
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the DVR
can get an IP automatically by setting this option
to ON.
NET IP:
This option is used to configure the Ethernet
communication settings. This is required for
the purpose of making a network connection.
Please consult
professional to configure it.
IP:
MASK:
GATEWAY:
HTTP PORT: XXXX
NET ACCOUNT:
COMM SETTING
: 01
COMM ID
: ON
RS232
: ON
RS485
NET ENABLE : ON
NET DHCP : ON
NET IP : SET
NET ACCOUNT
FTP SETTING
MAIN PAGE
NET ACCOUNT
USERNAME
ADMIN [admin
VIEW [view
SET NET ACCOUNT
FTP SETTING:
This entry allows users to set the FTP File
Transfer Protocol.
COMM SETTING
: 01
COMM ID
: ON
RS232
: ON
RS485
NET ENABLE : ON
NET DHCP : ON
NET IP : SET
NET ACCOUNT
FTP SETTING
MAIN PAGE
FTP SETTING
ENABLE
REC MODE
REC RATE
FTP ACCOUNT
34
MAIN PAGE
with a qualified MIS
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
PASSWORD
] [9999]
] [0000]
: OFF
: ALARM REC
: 1F/ 1S
: SET