IDVIEW IV-110TX-SN Installation & Operation Manual page 45

5.
TCP/IP Configuration setting
Click Start
Network.Connections
Connection
Select Internet Protocol (TCP/IP), and
then click Properties.
Before processing the DVR installation in
a WAN, please make sure the Internet
connection works properly. If not, please
contact your ISP provider.
Control Panel
Local Area
43
If you are using a DHCP server, please select
"Obtain an IP address automatically". Any
assigned the IP address for the connected
DVRs must be in the same class type as the
server. If there is no DHCP server, please
select and specify an IP address and type in
the IP address of your PC. This IP address
must be different from the DVR IP but in the
same class type.
NOTE: The IP address of a DVR in a network
must be unique to itself as opposed to
those of the other chosen PCs, but in the
same class type.