Table of Contents
Advertisement
10.1.3 View the DVR video from a remote PC
Once the Network Viewer is executed a Login
will promptly appear. You must enter the default
admin
User Name:
, password:
respective spaces and click OK to log into the
application.
.
Follow the instructions below to use the Network
Viewer to browse a DVR video from a remote
location. Upon entering the Network Viewer, the
connection box will appear as follows.
1. Click the Find tag to connect the whole DVR
device in the LAN.
2. Choose a channel number from the Channel
3. Type in the user name: admin (the text box
9999
in the
4. Click the Modify tag to check the data in the
5. Please repeat steps 2 to 4 again if you wish
6. Click the Connect tag to establish the
NOTE: Upon connection, the connection status box
indicates the name and IP address of the
selected device. If there's a failure to connect, a
"Fail" message appears on the screen right
after the User Name; otherwise an "OK" appears.
To add more connections or units to the DVR,
please repeat the above instructions.
46
drop-down list.
will only accept "admin" as the user name),
and password: the same as the chosen
DVR-3021 (4-digit numbers, which you set
in the DVR unit).
Device List.
to connect with another device.
connection between the devices and the
computer. Click the Login tag to begin
viewing images.
Advertisement
Table of Contents
