Installing And Running Games (Windows 95) - Intergraph Intense 3D 100 Installation Manual

Installing and Running Games (Windows
95)
To install and run the Rendition Ready version of Quake:
1. From the Quake CD, install the MS-DOS version of Quake.
2. From the Intense 3D 100 Games CD, copy
SPD3D
computer containing the MS-DOS version of Quake.
For example, on a computer where the CD-ROM drive is drive E
and MS-DOS Quake was installed in \
copy e:\vquake\vquake.exe d:\quake_sw\vquake.exe
copy e:\vquake\spd3d.uc d:\quake_sw\spd3d.uc
3. Run
VQUAKE
.
VQUAKE EXE
to those in standard Quake, depending on your computer's
performance. Experiment with these higher resolutions to reach an
acceptable level of detail and frame rate.
To install and run other games:
See the
README
want to install for installation and configuration instructions.
. from the
UC QUAKE
. .
EXE
will provide higher resolutions at frame rates comparable
file or online Help file delivered with the game you
VQUAKE
directory to the directory on your
_
QUAKE
11
. and
EXE
on drive D:
SW