Installing The Windows Nt 4.0 Driver; Configuring The Video Display - Intergraph Intense 3D 100 Installation Manual

10

Installing the Windows NT 4.0 Driver

To install the Windows NT driver:
1. Insert the diskette containing the Intense 3D 100 driver into the
computer's floppy disk drive.
2. Log on to Windows NT using an account that has administrative
privileges.
3. In the Control Panel, double-click Display to view the Display
Properties dialog.
4. Click Settings (tab), then click Display Type. The Display Type
dialog display.
5. Click Change. The Change Display dialog displays.
6. Click Have Disk. Make sure A:\ displays in the Copy
manufacturer's files from box and click OK.
7. Click OK on the Change Display dialog. The dialog will list
Intergraph Intense 3D 100 as the driver type.
8. Click Yes when prompted to install the files. After the files install,
a message states that the driver files installed successfully.
9. Click OK until you are prompted to restart the computer.
10. Remove the diskette from the floppy disk drive and restart the
computer.

Configuring the Video Display

Refer to the Microsoft Windows 95 or Windows NT 4.0 documentation
and online Help for information on configuring your computer's video
display settings, such as screen resolution and color depth.