3Com NBX 100 Manual page 53

n
Your telephone extension.
n
Your NetSet password. (This is the same password you use to access
your voice mail.
Once NBXTSP is installed, you can use the features of your TAPI-enabled
software program. Consult your software manual or the software's help
files.
To change your NBXTSP configuration:
1 Open the Windows Control Panel, double-click the Telephony icon to
open the Dialing Properties dialog box, and then click the Telephony
Drivers tab.
2 In the driver list, select the entry labeled NBX TAPI Service Provider, and
then click the Configure button to open the NBXTSP Configuration dialog
box.
3 In the NetSet Address field, enter the address that you use to access
NetSet. This information is provided by your administrator.
4 To modify an extension, select one form the Extension list and then click
the Modify button to open the Add/Modify Extension dialog box.
5 Enter the new extension and/or password in the in the dialog box and
click OK.
Figure 8 NBXTSP Configuration Dialog Box
NBX Business Telephone Guide 53