Schedule - Ness IQ-SDI-4 User Manual

Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080
Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
Ness IQ-SDI Model
4 Channel DVR
Max. 25 fps per Channel
8 Channel DVR
Max. 25 fps per Channel
16 Channel DVR
Max. 12 fps per Channel
Click ( ) each frame on 'Quality' column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High and Std.
Click ( ) each frame on 'Duration' column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
Choose 'OK' to confirm the setting.
NOTE
The maximum recording frame is varied from different types of HD-SDI signal which can be input in to a DVR
NOTE
A, B Types of DVR will detect 1080i, 1080p or 720p HD-SDI input signals automatically while it is booting. (Auto Detection).
NOTE
For 1080i signal input, it cannot be used together with 720p and/or 1080p. Also Live zoom function is not supported.
CAUTION
IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.
4.5.2

Schedule

Please click ( ) RECORD>Schedule.
Each weekday is composed of 24 'Time blocks'. Each block represent 1 hour.
Click ( ) Camera frame to select Camera No. 1.
Please set the recording mode as follows:
① Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and PreAlarm)). If user
wants to stop recording, please clear all check boxes.
② Click block, row, column or all (square box) to register desired recording mode.
- Click ( ) a block and only the block will be registered.
- Click ( ) a row (S~H) and the entire row will be registered.
- Click ( ) a column (00~23) and the entire column will be registered.
- Click ( ) a square box (top-left side between 'S' and '00') and all the rows/columns will be registered.
Ness IQ-SDI Users Manual
360x 240(288) 720x240(288)
Max. 25 fps per Channel
Max. 25 fps per Channel
Max. 12 fps per Channel
720x480(576)
Max. 25 fps per Channel Max. 12 fps per Channel
Max. 25 fps per Channel Max. 12 fps per Channel
Max. 12 fps per Channel
Max. 7 fps per Channel
1280 x 720 1920 x 1080
Max. 7 fps per Channel
Max. 7 fps per Channel
Max. 7 fps per Channel
42 | P a g e