Popup Link - Ness IQ-SDI-4 User Manual

Select recording cameras and alarm outputs while Emergency recording using EMERGENCY key and set E-mail addresses
for notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
① System Event frame displays Emergency, which user does not have to change.
② Select cameras for recording when emergency occurs. Please check
cameras can be set.
③ Select alarm outputs to be worked when emergency occurs. Please check
than two alarm outputs can be set.
④ Select E-mail addresses for notification when emergency occurs. Please check
More than two E-mail addresses can be set.
Choose 'OK' to confirm the setting.
4.6.5

Popup Link

Please click ( ) LINK>Popup Link
When Motion or Alarm-In is detected, user can select a popup or beep sound for warning, or have a particular channel of
interest to pop-up on Spot Screen.
Please follow the setup procedures below.
① Select camera
② Popup: Please Check
③ Beep: Please Check
④ Spot: Please Check
Click Copy to All Cameras button, then the present channel setup will apply to all other cameras.
Choose 'OK' to confirm the setting.
Ness IQ-SDI Users Manual
and the following screen will appear.
a check box under making the popup screen for main monitor.
a check box under making beep sound.
a check box under making the popup screen for spot monitor.
a check box under Link Camera. More than two
a check box under Link Alarm Out. More
a check box under Link Notification.
48 | P a g e