System - Ness IQ-SDI-4 User Manual

NOTE
This has a different function from Factory Reset Switch on the back panel of DVR in that System Log is not initialized.
Import: Copy the Menu setup stored in USB memory stick into DVR. Please plug in the memory stick and then
Import.
Export: Store the Menu setup of DVR in USB memory stick. Please plug in the memory stick and then
When user is on Default, Import or Export process, a message box will ask the progress and click the confirmation icon, then
a message box will show whether its success or failure.
System Log
Export: Store the System Log contents in USB memory stick. Please plug in the memory stick and then
When user is on Default, Import or Export process, a message box will ask the progress and click the confirmation icon, then
a message box will show its success or failure.
Version
When user complete Status data input, please
Version Upgrade
User may upgrade DVR software.
Please follow the Upgrade procedure below.
① Plug USB memory stick having upgrade file into DVR.
②
Click ( ) Load frame. Then, software version stored in the USB will appear on the left-hand side.
③
Click ( ) Start frame
④ When the upgrade is completed, a dialogue box pops up. Please choose 'OK' and DVR will auto-reboot.
CAUTION
DO NOT UPGRADE UNTIL INSTALL A HARD DISK DRIVE. MAKE SURE TO UPGRADE WHEN HDD IS IN PROPER OPERATION.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF MAY CAUSE PERMANENT DAMAGE.
Record
When user completes Version input, please
Ness IQ-SDI Users Manual
click ( ) Version
to start the upgrade.
click ( )
and the following screen will appear.
Record. Then, the following screen will appear.
click ( )
click ( ) Export.
click ( ) Export.
21 | P a g e