Sensor/Relay Device Pinhole Allocation - Avermedia IWH3216 Touch User Manual

2.3

Sensor/Relay device pinhole allocation

The I/O card enables you to connect 16 sensor inputs and 4 relay outputs. Just connect the external sensor
and relay pin directly to the I/O card pinhole. Check the table below and locate which pinhole is assigned to
sensor input and relay output.
The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, etc.) is
being transmitted to the I/O card and this triggers the system to respond and send signal to relay device (i.e.,
alarm, telephone etc).
Pin # Definition
1 Relay Signal 1
2 Relay Signal 2
3 Relay Ground
4 Relay Signal 3
5 Relay Signal 4
6 Relay Ground
7 Sensor Signal 1
8 Sensor Signal 2
9 Sensor Signal 3
10 Sensor Signal 4+
11 Sensor Ground Signal
12 Sensor Signal 5
13 Sensor Signal 6
Pin # Definition
14 Sensor Signal 7
15 Sensor Signal 8
16 Sensor Ground Signal
17 Sensor Signal 9
18 Sensor Signal 10
19 Sensor Signal 11
20 Sensor Signal 12
21 Sensor Ground Signal
22 Sensor Signal 13
23 Sensor Signal 14
24 Sensor Signal 15
25 Sensor Signal 16
26 Sensor Ground Signal
10