Hardware Introduction; Front Panel - Avermedia IWH3216 Touch User Manual

1.3

Hardware Introduction

1.3.1

Front Panel

Tip
Touch the blue word, button center, blue arrow, and blue area to make a selection or functional
Name
(1) Power
(2) IR Sensor
(3) IR Sensor port
(4) System power indicator
(5) HDD indicator
(6)
(7)
(8) Playback Control
buttons
(9) Mode
(10) Menu
Function
ON/OFF DVR unit
Receive signal from the remote control to operate the DVR unit
For extended IR sensor cable(optional)
System power status indicators. Indicate running state of system. Lights when the
system is running.
When DVR system is recording, the light will keep flashing.
Move cursor to left, right, up, and down direction DVR application
interface and function setup window.
To move PTZ camera lens to left, right, up and down in PTZ mode
Touch the blue area to go to next or previous frame.
Go forward direction is Next frame and backward direction is
Previous frame.
Confirm or make a selection
To playback video at slower speed of 1/2x, 1/4x, 1/6x, 1/8x, 1/16x, or 1/32x.
To rewind the recorded video
To pause playback
To start playback
To playback video at faster speed of 2x, 4x, 6x, 8x, 16x, or 32x.
Switch between preview, playback, and EMap mode.
In preview mode, user can switch between Preview, Playback and EMap mode.

In playback mode, user can switch between Preview and Playback mode.

In EMap mode, user can switch between Preview and Emap mode.

Call out system setup menu on preview mode
Call out playback menu on playback mode
4
.