Memory Configuration Table; Step 3 Install Expansion Card - SOYO SY-7VBA133U User Manual

Hardware Installation
Your board recommend a limit of 3 DIMMs or 6 banks at 133 MHz for
1.5GB max memory using unbuffered and Non-ECC DIMM modules. On
this motherboard, DRAM speed can be set independent from the CPU
front side bus speed. Depending on the DRAM clock speed setting in the
BIOS setup, appropriate memory modules must be used. For FSB 66MHz
speed, use PC66 or PC100 memory; for FSB 100MHz speed, use
PC66/PC100/PC133 memory; for FSB 133MHz speed, use PC100 or
PC133 memory.

Memory Configuration Table

Number of
Memory
Modules
RAM Type
Memory
Module Size
(MB)

Step 3 Install Expansion Card

The motherboard has 1 AGP slot, 5 PCI slots and 2 ISA slots.
1. Read the related expansion card's instruction document before inserting
the expansion card into the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
DIMM 1
128/256/512 MB
13
SY-7VBA133U
DIMM 2
SDRAM
DIMM 3