Quick Install Guide; Starting Out - Billion BiPAC 7402X Quick Install Manual

Billion 7402X/GX 3G/ADSL2+ VPN Firewall Modem/Router Set Up
The Billion 7402X/GX 3G/ADSL2/2+ VPN Firewall Modem/Router has a Dual
WAN interface for use with fixed line ADSL services or mobile 3G services.
You can set up the router with:
1. ADSL as the primary WAN interface with 3G as a back-up (Autofailover
mode) or,
2. You can set 3G as the primary WAN interface to create a portable
hotspot, for instance at an exhibition, road show, field trip etc.
This installation guide will take you through the process of initial configuration of
your ADSL settings with 3G as a back-up (see sections 2.1 and 2.3). Once you have
configured your ADSL and 3G settings you can then change the primary WAN
interface to 3G for use as a stand alone 3G router or portable hotspot mode (see
section 2.4).

1.1 Starting out:

Before you can establish an Internet connection through your Billion 7402X/GX
Modem/Router make sure you have the following:
1. A Computer or Notebook with an installed Network Adaptor (sometimes called
an Ethernet Adaptor, Network Card or NIC)
2. An ADSL or DSL service account and configuration information provided by
your Internet Service Provider (ISP). You should need only a User Name and
Password, but you can check with your ISP to see if you require any of the
other following configuration parameters to connect your Billion 7402X/GX
Modem/Router to the Internet :
a. ISP User Name and Password
b. VPI/VCI parameters
c. Multiplexing Method
d. Host and Domain Names
e. ISP Domain Name Server ( DNS ) Address
f. Fixed or Static IP Address.
3. A compatible 3G USB dongle or USB stick for 3G connectivity with SIM card
(see www.billion.uk.com/compatible-3G.htm
from your mobile service provider.
4. Username and Password and APN from your mobile service provider.

QUICK INSTALL GUIDE

3
for a full list of compatible cards)