Troubleshooting The Adsl Connection - Billion BiPAC 7402X Quick Install Manual

9. The Status page will then show your 3G connection details.
10. The default setting for your 3G connection is Always On. You can change
your 3G to be On Demand, so that if there is no internet activity the 3G will
disconnect after a set time. Once internet activity resumes (browsing, email etc.)
the 3G will automatically reconnect. If you would prefer your 3G to be On
Demand, you can change the settings by clicking the On Demand button in the
Connection field in the 3G WAN Profile and then clicking Apply, followed by
Save Config and Apply again to save the settings.
11. If you now need to set up your wireless security, from the Status page of the
router go to Basic>WLAN and select your preferred wireless security from the
drop down menu in the Security Mode field. (Please ensure your wireless adaptor
or laptop is compatible with your chosen security mode). For WPA you should
enter an alphanumeric password (numbers and letters) of between 8 and 64
characters in the WPA Shared Key field and click Apply, followed by Save
Config and Apply again to save the settings.
12. This completes the configuration of your 3G connection. Please logout of the
router when you have finalized your required settings. For advance configuration
please access the manual on the CD provided.

3.1 Troubleshooting the ADSL connection:

1. Check that the ADSL light on the front of the router has turned solid. This can
take up to 1-2 mins after switching on. (If the ADSL light slowly flashes then
19