Billion BiPAC 7402X Quick Install Manual page 4

1.2 Steps for Connection:
The following are the steps to properly connect your Billion 7402X/GX
Modem/Router:
1. Turn off your computer.
2. If you do not have an ADSL faceplate installed by your service provider, you
must ensure ADSL splitters (also called microfilters or filters) are fitted to all
telephone sockets in use.
3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen
telephone socket (or ADSL faceplate if you have one) to the DSL Port of your
Billion 7402X/GX Modem/Router.
4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your
Billion 7402X/GX Modem/Router to the Network Adaptor in your computer.
5. Connect the Power adaptor to the Billion 7402X/GX Modem/Router and plug the
other end into a Power outlet. Power up the unit.
6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor
to locate the Router. Please wait for the DSL light on the front of the router to turn
to solid – this may take up to 1-2 mins (see 3.1 Troubleshooting the ADSL
connection).
7. You are now ready to configure your ADSL and Wireless connection for the
Billion 7402X/GX Modem/Router. All you need to do is to follow the instructions
that follow and enter your User Name and Password as supplied by your Service
Provider. No other changes should be necessary.
4