Auto Provisioning - ATCOM AT-620P User Manual

AT-620P User Manual
Notice：Users can revise the exported config file by themselves and import the
config file with only modules, for example if there is the SIP setting page in the
config file , the IP phone will only change SIP setting after import this file and
leave other setting as not changed.
Type: upgrading type
Application update: update firmware。
Config file export: export the current configuration to a FTP/TFTP server
Config fie import: import configuration file from a FTP/TFTP server
Protocol: choose server type FTP or TFTP

Auto Provisioning

7.3.
Current Version: the system will display the current version number need to
modify the version id need to more than this number on the config file
before auto provision update.
Server Address: FTP/TFTP server address
Username: FTP server user name
Password: FTP server password
Config File Name: The name of configuration file. Normally users leave it as
blank the IP phone search for the file with the name same as its MAC in the
server
Config Encrypt Key: The encrypt key of confirmation file
Protocol Type: The protocol type that used for upgrading. FTP TFTP and Http
Update Interval Time: The interval time that the terminals search for new
configuration file , counted in hour
Update Mode: auto provision mode;
A、 Disable: not auto update，
B、 Update after reboot: auto update after reboot，
C、 Update at time interval: auto update after a certain time
ATCOM TECHNOLOGY CO., LIMITED