Call Pickup; Join Call - ATCOM AT-620P User Manual

AT-620P User Manual
3) Press the navigation button to choose "incoming call", press soft button OK.
4) Press the navigation button to browse the incoming call record. If there is no
record, the LCD screen display "List is Empty".
Out coming call
Method 1,
1) Press "Menu"
2) Press up or down navigation key, and select call history and press soft
button "OK"
3) Select "Outgoing call" through "up" or "down" key, and press soft button
"OK"
4) Press up or down navigation button and check the received calls, LCD will
show "List is Empty", if there is no received incoming call.
Method 2,
1) Press "soft button Clog" under standby status, entering outgoing call list.
2) Press up or down navigation button to read the received calls, LCD will
show "List is Empty", if there is no received incoming call.

Call pickup

10、
Call pickup is simulated from "Pickup" function processes from IPPBX. When A
call B with no reply after ring tones, C could pick up the call from A for B by
inputting the prefix and B's phone No.
C needed to set the dial peer with prefix code as follow
To refer *1* as the set prefix code, C could get the call from A to B by dialing
*1*+B,
*1* prefix could be freely set as long as no confliction with other dialing rules.

Join call

11、
"A" could join in the conference call，by input a prefix plus a phone No. which is
already in the conference.
A requested to set the prefix code for dial peer as follow
To refer *2* as the set prefix code， "A" could join in the conference by dial *2*
plus the call No. which is already in the conference.
*2* prefix could be freely set as long as no confliction with other dialing rules.
ATCOM TECHNOLOGY CO., LIMITED