Auto Provisioning - ATCOM AT-620 User Manual

AT-620 User Manual
Password: FTP password (TFTP no need).
File name: the firmware or configuration file name that IP phone will search
for in the server , if leave it as blank the IP phone with search the file with
the name of its MAC such as 000102030405.
Notice：Users can revise the exported config file by themselves and import the
config file with only modules, for example if there is the SIP setting page in the
config file , the IP phone will only change SIP setting after import this file and
leave other setting as not changed.
Type: upgrading type
Application update: update firmware.
Config file export: export the current configuration to a FTP/TFTP server.
Config fie import: import configuration file from a FTP/TFTP server.
Protocol: choose server type FTP or TFTP.

Auto Provisioning

7.3.
Current Version: the system will display the current version number need to
modify the version id need to more than this number on the config file
before auto provision update.
Server Address: FTP/TFTP server address.
Username: FTP server user name.
Password: FTP server password.
Config File Name: The name of configuration file. Normally users leave it as
blank the IP phone search for the file with the name same as its MAC in the
server.
Config Encrypt Key: The encrypt key of confirmation file.
Protocol Type: The protocol type that used for upgrading.:FTP,TFTP or Http.
Update Interval Time: The interval time that the terminals search for new
configuration file , counted in hour.
ATCOM TECHNOLOGY CO., LIMITED