Preload Password; Check The Phone's Ip; 5Th、 Web Settings - ATCOM AT-620P User Manual

AT-620P User Manual
NEW before it , or else it has been read
10) Press up and down key in navigation keyboard to select the message
and press ok （soft button2）to read it
11) If you want to delete the SMS , just press del(soft button 1) after you
select it
Caution：
In SMS list, you can press quit (soft button) to go to the upper menu
Dial means dial to call sender directly when you are reading his SMS
Edia means call the sender after edit his number
Edit means editing the SMS context

Preload Password

16、
There are 2 models to set the authority of web accessing and command line:
Guest model and Admin model. User could view and configure all items in Admin
model. While user couldn't change the SIP (1-2) and IAX2 configuration as well
as server address and port but only access and view the information. User would
enter different model after input different user name and password:
Guest Model
User Name：guest
Pass word：guest
Admin Model：
User Name：admin
Pass word：admin
Keypad password: 123

Check the Phone's IP

17、
Press the up or down navigation button to check the phone's IP address
5th、 Web settings
Enter AT-620P IP addresses in the web browser to go to the log on page, and key
in the username and password to access AT-620P setting page.
Default username and password is:
Administrator:
User:
ATCOM TECHNOLOGY CO., LIMITED
Username: admin
Username: guest
password: admin
Username: guest