Ricoh RN-MF1 Service Manual page 117

Messages
Machine is not ready.
Wrong Model.
Machine is busy.
FW Update Done. *** Please
reboot the Machine.***
Machine loses communication.
***Please check FW Update
Done. Then reboot the
Machine.***
Downloaded file is broken! Do
NOT use print, scan, fax and
copy function at the same time.
Message for Network update
Messages
Machine is not ready.
Comment
Can not get MFP status form USB
status channel before F/W file is
transmitted.
F/W file is not matched for current
machine.
F/W update is running.
Other MFP functions are running.
F/W update is completed.
F/W file has transmitted. Polling F/
W update progress fail.
F/W checks the downloaded file.
And get wrong checksum. So stop
to modify F/W.
Comment
Can not get MFP status form
Network status channel before F/
W file is transmitted.
Firmware Updating
Action
Check USB cable connection.
Check USB Print Driver if it is
available.
Do not update F/W when MFP
is in power-on stage.
Please check the version of F/
W file and machine if it is
suitable for MFP.
Please wait F/W update is
completed.
Please wait other MFP functions
are completed.
Please reboot the Machine.
Do not reboot engine till Engine
Panel display "Firmware
Update Done. Please reboot".
Then reboot engine.
Check the downloaded file is
not broken.
Do not use MFP functions when
update firmware.
Action
Check PC network settings and
IP address.
Check MFP network settings
and IP address.
Do not update F/W when MFP
is in power-on stage.
5
115