Ricoh RN-MF1 Service Manual page 102

5. System Maintenance Reference
Fax Maintenance
TX Settings
Overseas Comm
Mode Settings
5
Dial Pulse Setting
100
Sets the redial interval when Tx fails.
Redial Interval
[5 Min/ 6 Min]
Sets the number of redials when Tx fails.
Redialings
[2 times/ 3 Times/ 4 Times/ 5 Times]
This sets the machine to ignore a DIS signal sent from the
Overseas Comm
called station once in a sending operation.
Mode
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects the CNG
signal after the line is connected. If it is set to "Off", the
Minimum Time
machine detects the CNG signal as long as the line is
Length
connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
This sets the number of pulses that are generated during
dialing.
• N: Dialing '0' generates 10 pulses --- Dialing '9'
Dial Pulse Type
• N+1: Dialing '0' generates 1 pulses --- Dialing '9'
• 10-N: Dialing '0' generates 10 pulses --- Dialing
generates 9 pulses.
generates 10 pulses.
'9' generates 1 pulse.