Ricoh RN-MF1 Service Manual page 113

6. The above updating program should appear on the screen.
7. For a USB connection, click "Eng. F/W Update (USB)" [A]. For a network connection, enter the
machine's IP address in "MFP IP Address" [B], and then click "Eng. F/W Update (NET)" [C].
8. The update is in progress when "Firmware is Updating" appears.
• You will see the progress percentage appear while the update is in progress.
• Do NOT turn the main power of the machine off during updating.
Firmware Updating
5
111