Ricoh RN-MF1 Service Manual page 111

3. Make a folder on a local drive of your computer and save the files there.
• "FWUpdate ToolSP.exe": Used for Controller firmware or Engine firmware
• "FWUpdate Tool.exe": Used for Controller firmware
4. Connect a USB cable between a computer and the machine.
5. Click the "FWUpdateToolSP.exe" or "FWUpdateTool.exe" file to execute the updating program.
6. For a USB connection, click "F/W Update (USB)" [A]. For a network connection, enter the machine's
IP address in "MFP IP Address" [B], and then click "F/W Update (NET)" [C].
7. The message "Download complete" appears.
• Do not turn the main power off from this point until the update procedure is completed.
8. The following message appears on the screen:
"Firmware is Updating ..."
9. Wait until the update is finished.
• Do not touch the machine during updating!
Firmware Updating
5
109