Ricoh RN-MF1 Service Manual page 115

Messages
USB Upload : FAIL
Can't open ROM file.Please
check ROM file.
Can't open Eng. ROM file.
Please check Eng. ROM file.
New Version: Update FW
Eng FW version: Update Eng
FW
Firmware is Updating...
Eng Firmware is Updating...
FW Update Done. *** Please
reboot the Machine.***
Message for Network update
Messages
Connecting...
Net Upload : End of data
Comment
Can not open USB printer driver
while F/W file is transmitted.
F/W file transmission can not be
completed.
(Transmission will be canceled if
timeout.)
F/W file does not exist.
Engine F/W file does not exist.
AIO FW is transmitting
Engine FW is transmitting
AIO FW is updating
Engine FW is updating
F/W update is completed.
Comment
Connect to MFP.
Update F/W successfully.
(Transmission Time: <30 sec)
Firmware Updating
Action
Check USB cable connection.
Check the installation of USB
Print Driver if it is available.
Check MFP status if it is
available.
Check USB cable connection.
Check USB Print Driver if it is
available.
Check MFP status if it is
available.
Check the download file name
in setting.ini. "ImageFile="
Check the download file and fw
update tool is in the same folder.
Check the download file name
in setting.ini. "EngImageFile="
Check the download file and fw
update tool is in the same folder.
Not available
Not available
Not available
Not available
Please reboot the Machine.
Action
Please wait a moment.
Please reboot MFP after panel
shows reboot message.
5
113