Skipping The Blank Part At The Beginning Of A Song - Yamaha Disklavier E3 Operation Manual

■ About Song Playback Screen
When the song playback is stopped — with the timer play function is set to
ON and the current time is displayed — "T" flashes to the right side of the
current time.
Memory
A02-001
iano Sonate
12:00T
Indicates that the timer play is on.

Skipping the Blank Part at the Beginning of a Song

[SETUP] "Playback"
When there is a blank part created at the beginning of the recorded song,
turning on this function automatically skips the unwanted part and starts
playback from the actual beginning of the song.
1
Press [SETUP] on the remote control.
The setup menu screen appears.
=SETUP MENU=
*TimerPlay
*MIDI
2
Select "Playback" with the cursor buttons ([
[ ]), then press [ENTER].
The playback setting screen appears with the cursor flashing.
3
Press [+/YES] and [–/NO] to change setting.
=Playback=
SkipSpace=ON
KeyMotion=ON
LR SO V+00
(1/3)
*AudioI/O
*M-Tune
=SETUP MENU= (2/3)

*Network *Playback
*Reverb *Shortcut
=Playback= -+
>SkipSpace=OFF
>KeyMotion=ON
-+
] [ ] [ ]

Advanced Song Playback
Note:
The "Reverb" option appears only
on models equipped with the Silent
Piano™ function.
Note:
The "KeyMotion" option appears
only on models equipped with the
Silent Piano™ function.
Chapter
4
39