Changing The Initial Settings (Data Recorded At The Beginning Of A Song) - Yamaha Clavinova CLP-265GP Owner's Manual

Changing the Initial Settings (Data recorded at the
beginning of a song)
The initial settings (data recorded at the beginning of a song) can be changed after the recording.
For example, after recording, you can change the voice to create a different ambience or adjust the
song tempo to your taste.
You can change the following initial settings.
Individual Parts
• Voice selection
• [REVERB] depth
• [EFFECT] depth
• Dual mode voices
• Damper/soft pedal depth
Entire Song
• Tempo
• [REVERB] type (including OFF)
• [EFFECT] type (including OFF)
1. Engage Record mode and select a part to change the initial settings.
The indicator glows red. (Data shared by two parts can be changed via either part.)
2. Change the settings via the panel controls.
For example, if you wish to change the recorded voice from
, press the
[E. PIANO 2] [E. PIANO 2]
soft pedal depth, press and hold the pedal.
Be careful not to press the
either of which will start recording and erase all previously-recorded data on the
selected part.
3. Press the [REC] button to exit Record mode.
Be careful not to press the
either of which will start recording and erase all previously-recorded data on the
selected part.
button. When you wish to change the damper/
button or a key on the keyboard,
SONG [PLAY/PAUSE]
SONG [PLAY/PAUSE] button or a key on the keyboard,
[E. PIANO 1] to
Recording Your Performance
NOTE
You can cancel changes made
to the initial settings by select-
ing a different part after Step
2, then exiting Record mode by
pressing the [REC] button.
(Changes made to the data
shared by two parts are also
canceled.)
CLP-265GP Owner's Manual
33