Applying The Reverb Effect To The Digital Piano - Yamaha Disklavier E3 Operation Manual

Applying the Reverb Effect to the Digital Piano

[SETUP] "Reverb"
A piano sounds differently depending on the size of the room, or the
material of the building in which it is played. The reverberation is the major
reason for this difference. Using the reverb functions of the Disklavier and
simulating the reverberation in a concert hall, gives you the feeling of the
being at a live performance.
1
Turn the [REVERB] knob clockwise to turn the reverb
effect on.
For Grand Pianos
For Upright Pianos
[REVERB] knob
2
Press [SETUP] on the remote control.
The setup menu screen appears.
=SETUP MENU=
*TimerPlay
*MIDI
3
Select "Reverb" with the cursor buttons ([
[ ]), then press [ENTER].
The reverb setting screen appears.
[REVERB] knob
(1/3)
*AudioI/O
*M-Tune
_
(2/3)
=SETUP MENU=
*Network *Playback
*Reverb *Shortcut
=Reverb= -+
>Type=Hall1
] [ ] [ ]
]
The Silent Piano™ Function
Note:
The reverb effect setting is saved
even though the Disklavier is turned
off.
Note:
Reverb is off when the [REVERB]
knob is turned fully
counterclockwise.
Chapter
6
51