Yamaha Disklavier E3 Operation Manual page 56

4
Press [ ] and [
The cursor moves to the function parameter.
5
Press [ ] and [
parameter, then press [+/YES] and [–/NO] to select the
desired function.
The following functions are available:
PLAY Starts playback of songs.
STOP Stops playback of songs.
RND Starts playback of songs at random.
OFF Turns off the Disklavier (standby mode).
When "PLAY" or "RND" is selected, the album selection parameter
appears.
6
Press [ ] to move the cursor to the album selection
parameter, then press [+/YES] and [–/NO] to select the
desired album.
The following selections are available:
Mem01 - Albums (01 - 99) in the internal flash memory.
Mem99
Lst01 - Playlists (01 - 99) created in the internal flash memory.
Lst99
Radio The last DisklavierRadio channel you have listened to.
----- Current selected song.
] to select the desired program number.
] to move the cursor to the function
=TimerPlay=
>TimerPlay=ON
01[### ##:##
=TimerPlay=
>TimerPlay=ON
01[### ##:## PLAY Mem01]
 -+
PLAY -----]
 -+
Note:
You cannot select "Radio" if you
select "RND" in step 5.
Note:
When "Radio" is selected, the
Disklavier will connect to the
Internet one minute prior to the time
you have set, and the channel
selection screen appears.
DisklavierRadio will begin to play
at the designated time.
Advanced Song Playback
Chapter
4
37