Yamaha Disklavier E3 Operation Manual page 52

■ Adjusting the TG Balance
1
Press [BALANCE] on the remote control.
The TG balance setting screen appears.
=BALANCE=
TG BALANCE 100
2
Press [+/YES] and [–/NO] to adjust the volume of the tone
generator.
Tone generator volume can be adjusted in a range of 10 to 127.
■ Adjusting the Audio Balance
1
Press [BALANCE] twice on the remote control.
The audio balance setting screen appears.
×2
2
Press [+/YES] and [–/NO] to adjust the volume of the
audio.
Audio volume can be adjusted in a range of 10 to 127.
-/+
=BALANCE= -/+
AUDIO BALANCE 100
Advanced Song Playback
Note:
You can also use the dial on the
control unit to adjust the volume.
Note:
You can also use the dial on the
control unit to adjust the volume.
Chapter
4
33