Skipping The Blank Part At The Beginning Of A Song - Yamaha Disklavier E3 Operation Manual

Chapter
4
Advanced Song Playback
■ About Song Playback Screen
When the song playback is stopped — with the timer play function is set to
ON and the current time is displayed — "T" flashes to the right side of the
current time.
A02-001
Indicates that the timer play is on.

Skipping the Blank Part at the Beginning of a Song

[SETUP] "Playback"
When there is a blank part created at the beginning of the recorded song,
turning on this function automatically skips the unwanted part and starts
playback from the actual beginning of the song.
1
Press [SETUP] on the remote control.
The setup menu screen appears.
2
Select "Playback" with the cursor buttons ([
[ ]), then press [ENTER].
The playback setting screen appears with the cursor flashing.
3
Press [+/YES] and [–/NO] to change setting.
38
Memory LR SO V+00
iano Sonate
12:00T
=SETUP MENU=
*TimerPlay *AudioI/O
*MIDI *M-Tune
=SETUP MENU=
*Network
=Playback=
>SkipSpace=OFF
=Playback=
>SkipSpace=ON
(1/3)
] [
(2/3)
 
*Playback
*Shortcut
-+
-+
] [ ]