Specifying The Playback Part (Right-Hand/Left-Hand) For A Midi Song - Yamaha TransAcoustic TA3 Owner's Manual

Specifying the playback part (right-hand/left-hand) for a MIDI Song

Depending on the particular MIDI Song, such as preset Songs, the Song data may include independent right-hand and
left-hand parts. This type of Song data allows you to specify the playback part, and practice the part of one hand while the
other part is playing back.
NOTE
• A MIDI Song consists of 16 channels and on each of the preset Songs, the right-hand part is assigned to channel 1 and the left is
assigned to channel 2. On this instrument, only channels 1 and 2 can be independently muted; channels 3–16 are always played back.
• You cannot specify the playback part for Songs that have no data in channels 1 or 2, or for the Voice Demo Songs.
1
Select a MIDI Song, and then start playback (steps 1–5 on page 25).
2
Hold down Button 1 [Select] for two seconds
to call up the playback part on the display.
3
Rotate the [VALUE] control to select the
part to play back.
Playback continues with the selected part(s).
• Lr: Plays both right-hand and left-hand parts.
• r: Plays only the right-hand part.
• L: Plays only the left-hand part.
You can specify the playback part also when the Song is paused. When you stop playback, the setting is reset to "Lr."
28
TA3 SH3 SC3 Owner's Manual
Hold down for two seconds