Customise Quick Menu; Traffic Settings - ZENEC GPS NAVIGATION SYSTEM User Manual

6.3.2 Customise Quick menu

The content of the Quick menu (page 21) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The list of available functions and their descriptions are on page 21.

6.3.3 Traffic settings

The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
Zenec navigation announces if the GPS position is lost. Tap this button
to turn off the announcement.
Zenec navigation announces route recalculations when you leave the
recommended route. Tap this button to turn off the announcement.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
Normally you do not need to tune to a station with TMC data. The
tuner automatically sweeps through the FM frequency range to find the
appropriate stations broadcasting traffic information. Turn this switch
off and set the frequency manually if needed.
With this switch on, Zenec navigation receives traffic information from
the more reliable paid sources only. Turn this switch off to receive
traffic information from both paid and free to public sources.
This setting determines how Zenec navigation uses the received real-
time traffic information in route calculation. When calculating a new
route, or when recalculation becomes necessary based on the
received Traffic events, Zenec navigation avoids traffic events if it
makes sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.
Description
94